Prices, subscriptions, validation, and — the part most listings hide — whether you can actually get your data out, and what that export costs. Tap any sensor for its full page. Tap any column heading to sort.
How this site stays honest: the method is public — same bar, same reps, published numbers. Rankings follow validation and export freedom, not who pays. The comparison table starts in random order — see below — so position itself favours no one. Built by a lifter who owns and measures Vitruve, OVR and Enode head-to-head.
We don't want your email. No name, no email, no account. This quiz is for research — your answers (with no way to identify you) help us understand what lifters and coaches actually need, so the comparison tables keep answering the right questions. You'll get your recommendation on this screen either way.
24entries — 19 devices + 5 apps, incl. discontinued lines so you don't buy dead gear
~€249cheapest validated tier — ADR (€249) and RepOne (from ~$249), both free CSV, no subscription
$545/yrwhat GymAware charges on top of hardware before full CSV export unlocks
0sensors you should buy before checking their export — see the Export guide
Compare all sensors
Random order by default: this table is shuffled on every page load, so no sensor or maker is favoured by being listed first — it is a listing, not a ranking. Click a column heading to sort ascending / descending — price sorting is the fastest way to see the real spread — or reshuffle to return to a random order. Use the filters to narrow by type, export, or budget. Click a row for the full sensor page.
Sensor
Price (USD)
Type
Subscription
Export cost
Validation
Status
Prices checked Nov 2026 from makers' own stores / published guides; euro prices converted approximately. Quote-only prices are guide figures — confirm before budgeting. “Validation” summarises peer-reviewed evidence, not marketing claims.
What's not listed, and why: this is the mainstream set, not every device ever made. Motorised systems (e.g. 1080 Motion) are a different category from bar sensors; MyLift is folded into the MyJump Lab row; and niche or regional units with no verifiable price, store, or export documentation are held until they can be checked properly — listing them unchecked would break the point of this table.
How to read this table
Export is the hidden price
A $495 sensor whose CSV lives behind a $545/yr cloud tier costs ~$1,040 in year one. A $1,196 sensor with free Excel export costs $1,196 — once. Always add hardware + first-year export cost before comparing.
Validation beats features
Typical error against motion capture is the number that matters. FLEX (0.03–0.04 m/s, Weakley 2020) and RepOne (RMSE 0.01–0.04 m/s vs Vicon, PLOS ONE 2024) publish theirs. If a maker publishes nothing, treat accuracy as unknown.
Export guide — who lets your data out?
Random order by default: this list is shuffled on every page load, so no sensor or maker is favoured by being listed first — it is a listing, not a ranking. Click a column heading to sort ascending / descending, or reshuffle to return to a random order. Use the filters to narrow by type, export, or budget. If you plan to analyse your training — or ever change sensors — this table matters more than the spec sheet. Where a listing is app-only, the Hardware column says so — there is no device to buy.
Sensor
Export cost
Formats
Hardware price
Free to export
OVR Velocity (CSV via the free OVR Connect app, no paywall) · Enode (CSV on free tier; API from €39/mo) · Tendo (Excel, raw per-rep) · Chronojump (local CSV, open-source) · ADR (free app export — verify a sample file first) · RepOne (free CSV from the app) · Vitruve (session CSV/Excel free; raw per-rep + API gated to paid Hub/Teams tiers).
Paywalled, locked, or unknown
GymAware RS: CSV only on Cloud Standard ($545/yr) or Premium ($1,095/yr, API included); free Run mode stores nothing. FLEX: in-app export format unverified — confirmed CSV runs through GymAware Cloud. Velocity AI: no export documented anywhere — assume closed until proven otherwise. Metric: free tier exports only the last 7 days.
Which sensor fits you?
6 questions — the 15 second quiz. Built to give you a straight recommendation — not a sales funnel.
We don't want your email. No name, no email, no account. This quiz is for research — your answers (with no way to identify you) help us understand what lifters and coaches actually need, so the comparison tables keep answering the right questions. You'll get your recommendation on this screen either way.
The vbtlifters.com Ecosystem
One home base, five specialist sites. VBT Lifters is live today. Strength Calculators are live right here on this site — the standalone velocitystrength.com site is still to come. The rest are shown as coming soon, with no dead links.
Trainer Directoryvbt.trainingFind VBT-informed trainers, and trainees looking for help from a VBT coach.Coming soon
Learn VBTvbt.educationStructured learning — what velocity-based training is, and how to use it well.Coming soon
Open Datavelocitytraining.orgOpen data repository, wiki and free resources — datasets and methods, published openly.Coming soon
Research Journalvelocitytrainingai.orgValidation studies, device comparisons and the published VBT literature, written up.Coming soon
Why an ecosystem?
Each site has one job: this one helps you pick a sensor, VBT Lifters analyses your data, Strength Calculators give you free tools at the rack, the directory connects lifters and coaches, and the .org sites publish the learning and the data openly. Everything routes back to the same standard — your data, exportable, and yours.
Strength Calculators
One switch for everything below — inputs, results, bars and plates all convert together.
Default 45 lb / 20 kg · max 60 kg (132.3 lb) · used in every plate calculation below · Bar: 45 lb
Velocity-zone calculator
Pick a lift and enter the mean bar speed of a set. You get the training zone that speed falls in, and the approximate intensity it represents — your rep shown as a bar against the generalized profile's assumed max (e1RM), with the speed that max would move at. Enter your 1RM for the lift too, and below the result every zone becomes a real weight range for you — with the plates to load a mid-zone weight on a 45 lb bar and on a 20 kg bar, and a zones-by-weight chart at the bottom. Primary lifts first, then secondary lifts, then Olympic lifts — alphabetical in each group.
Lift
1RM by weight
Enter a weight you lifted and how many reps you completed, and get an estimated one-rep max from six standard formulas — not just Epley. Each formula gets its own bar, so you can see how they disagree, and the headline is the median across all six.
1RM by velocity
Enter a load you lifted and the mean velocity of that rep or set. The estimator works back along that lift's load–velocity line to your estimated one-rep max, with working loads at 60–95% as bars and in a table — each percentage with the plates per side to load it on a 45 lb bar and on a 20 kg bar. Primary lifts first, then secondary lifts, then Olympic lifts — alphabetical in each group.
Lift
Plate calculator
Enter a target weight and get exactly what goes on each side of the bar. Bar weight: 45 lb — change it in the bar at the top of this tab (up to 60 kg). If the target can't be loaded exactly, you'll see the closest loadable weight and the remainder.
Reverse plate calculator — build the bar
The reverse check: pick the plates yourself and see what you've actually loaded. Tap a plate to add one per side — tap again to add another, use − to take one off. The barbell below builds as you pick, and the total updates live. Bar weight: 45 lb — change it in the bar at the top of this tab (up to 60 kg). Plates follow the LB / KG switch: lb 45 / 35 / 25 / 10 / 5 / 2.5, kg 25 / 20 / 15 / 10 / 5 / 2.5 / 1.25.
% calculator — percentages of 1RM
Put in your 1RM and get every working percentage from 50% to 95% — the weight for each, a bar for each, and the plates per side to load it. Your 70% is highlighted.
1RM to rep-max converter
Turn a 1RM into estimated rep maxes with six standard formulas — not just Epley. Each rep max — 3RM, 5RM, 8RM, 10RM, 12RM and 15RM — gets its own chart, with a bar for every formula's estimate for that rep max, so you can see how the formulas disagree. Under each chart, Load this gives the consensus: the median across all six formulas, with the plates per side to load it just below or exact.
The six formulas — and why they don't agree. Each formula below was fitted to different lifters, lifts and rep ranges, so each one, inverted to solve for the weight from your 1RM, gives a slightly different answer. The spread is the point: where all six cluster tightly, the estimate is sturdy; where they split, treat the number as a range and start from the median consensus. In the equations, w is the weight lifted and r is the reps.
Estimates drift as reps climb — treat 12RM and 15RM as guides, not guarantees, and expect them to vary by lift and lifter.
Velocity loss calculator
How much speed did the set cost you? Enter the mean velocity of the set's first rep and of its last (or current) rep, and get the velocity loss as a percentage — read against the bands this site teaches: power 5–10%, strength 10–20% (up to ~25% for bench), hypertrophy 25–40%, and 40–50% is a zone to avoid making routine.
Personal load–velocity profile
This profile is yours. Every other calculator on this tab works from a generalized load–velocity profile — average speeds for an average lifter. This one is fitted to your own measured sets: pick a lift, enter 2–4 loads with the mean velocity you actually moved each one at, and the tool fits your personal line, estimates your 1RM at this lift's minimum velocity threshold, and predicts the speed at any load — or the load at any speed — along your line. Primary lifts first, then secondary lifts, then Olympic lifts — alphabetical in each group.
Lift
Your measured points — one load and the mean velocity you moved it at, per row. Use sets from the same session, same setup, full intent on every rep.
Set analyzer
Enter a set's per-rep mean velocities — one per rep, in the order you lifted them — and get the set read back: best rep, set mean, the drop from your best rep to the last rep and to the slowest rep, and your junk reps, counted by the rule a rep more than 25% below the set's best. Then a plain stop / go call for the next set.
Jump readiness checker
Today's jump against your own recent baseline — read the way the validation studies read it: against measurement noise, not against a traffic light. The countermovement jump (CMJ) is the only jump test with substantial readiness validation, so it is this checker's primary mode. The other jump types are selectable, but each carries its evidence status below — for several of them the honest answer is that no readiness validation exists, and this checker will not invent one.
Today's jumps — enter 2–3 jump heights, all on the same device and method as your baseline. The checker scores the session by the mean, not the best jump (Claudino et al., 2017 — see the notes under the result).
Your baseline and your noise. Baseline is the mean of your recent session means — each session scored by its own mean first, then averaged. Your typical error (TE) / CV is your own day-to-day noise on the same device; if you know it, the read is judged against it first. The strategy variables are optional, and where the studies support them they are the better inputs — jump height is the least sensitive CMJ metric there is.
No universal “% below baseline” cutoff exists. No study reviewed for this page validates a fixed percentage-below-baseline flag. The −5% / −10% / −15% traffic-light bands in blog and commercial guides trace to practitioner material, not to any published validation — they are not evidence. The published decision rules are the noise-based ones this checker uses: a change beyond the athlete's own typical error, beyond 1.5 × typical error, or beyond a published MD/MDC value.
Jump height is the least sensitive CMJ metric. Height is preserved by strategy compensation and recovers earlier than the strategy variables: 72 hours after a fatiguing protocol, jump height and most single-point variables had recovered while increased jump duration and reduced eccentric utilisation persisted (Gathercole et al., 2015). The large acute-fatigue effects were in eccentric duration (effect size 1.91) and total duration (1.90), against 0.47 for jump height (Gathercole, Stellingwerff & Sporer, 2015). The validated signal is in the force–time strategy variables — eccentric and total duration, FT:CT, RSImod, eccentric forces, force at zero velocity — so if your device reports RSImod or FT:CT, enter them above: where the report of the evidence supports them, they are the better inputs.
Same device, same method — or the numbers do not compare. Flight-time height overestimated impulse–momentum height by 2.49 cm in a head-to-head study (2026), and height estimates from the same jump can differ by 0.6–15 cm depending on the equation used (Xu et al., 2023). A baseline must stay on one device and one calculation method; a percentage threshold built on one does not transfer to another.
The mean, not the best. Average CMJ height was more sensitive than highest CMJ height for detecting both fatigue and supercompensation (Claudino et al., 2017), and the mean of 3 jumps had a lower CV than the best jump in all 86 CMJ variables tested (Howarth et al., 2022). One dissent to note: in EPL academy players both scorings gave good-to-excellent reliability (Springham et al., 2024) — and the third attempt in a session tends to be the highest anyway (González-García et al., 2024), which biases a best-of-3 read upward.
How many baseline sessions? No study experimentally determines a required number. Protocols used 0–3 familiarisation sessions — Cormack et al. (2008) used three, the 2023 youth-soccer study a minimum of two, others one — and high reliability was achieved with no familiarisation sessions at all in physically active men (Moir et al., 2004). Build the baseline from session means on the same device, and re-check it as you get stronger.
Studies cited on this panel: Markovic et al. (2004) · Cormack et al. (2008) · Moir et al. (2004) · Gathercole et al. (2015) · Gathercole, Stellingwerff & Sporer (2015) · Beattie & Flanagan (2015) · Claudino et al. (2017) · Thorpe et al. (2017) · McMahon et al. (2018) · Comyns et al. (2019) · Pérez-Castilla et al. (2021) · Howarth et al. (2022) · elite youth-soccer reliability and sensitivity study (2023) · Xu et al. (2023) · González-García et al. (2024) · Springham et al. (2024) · de Pedro-Múñez et al. (2025) · Fort-Vanmeerhaeghe et al. (2023) · Slinde et al. (2008) · Bartlett et al. (2026) · flight-time vs impulse–momentum head-to-head (2026).
World records
Current competition world records by weight class — one table for both sports. Powerlifting: squat, bench press, deadlift and total from the IPF (International Powerlifting Federation) — the drug-tested authority for the sport, and the only international powerlifting federation that is a World Anti-Doping Code Signatory. Weightlifting: snatch, clean & jerk and total from the IWF (International Weightlifting Federation), in the weight classes in force since 1 August 2026. Open division, men and women, every weight class.
Record weightsKilograms are the official unit — pounds are kg × 2.20462, to one decimal. Weight classes are official kg classes, so they stay in kg.
Division (Classic / Equipped) applies to powerlifting only — choosing one hides the weightlifting rows and charts. The filters and the KG / LB switch drive both pages: this table, and the charts on How Strong Am I?
Records last checked 17 November 2026.
Four Equipped records are newer than the IPF's own records pages. At the 2026 World Open Equipped Championships in Istanbul (9–15 Nov 2026), Kelsey McCarthy set the women's 69 kg total at 655 kg, Kostiantyn Musiienko set the men's 93 kg bench press at 352 kg and the total at 1,064.5 kg, and Viktor Holinei set the men's 120+ kg squat at 506 kg. The IPF site was still showing the older marks when checked on 17 November 2026, so this table shows the Istanbul marks — tagged “New · Istanbul 2026”. Their dates come from same-day IPF posts, pending the IPF page update.
Sport
Sex
Division
Weight class
Lift
Record
Holder
Date
Meet / location
* Meet name inferred from location and date — the IPF's records pages list location and date only. Where no meet could be identified, the location alone is shown.
World Standards: ten weightlifting slots have no record holder yet — the weight shown is the IWF World Standard, the mark a lifter must beat to set the first record in that class.
Sources: Powerlifting — IPF official records pages (powerlifting.sport), Open division, full-power records; the IPF's separate single-lift bench press records are a different division and are not included. Weightlifting — IWF records cross-checked between FitnessVolt's records table (updated 9 Nov 2026) and Wikipedia's list of world records in Olympic weightlifting: a cross-checked compilation, because the IWF's own records database could not be opened as a single table. Marks from retired IWF classes (such as +109 kg and +87 kg) are not current records and are not shown.
Strength certificate
Build a printable certificate for an athlete — each lift they enter, shown as a percentile against competitive lifters in their bodyweight class, with the population named in the line: powerlifting from OpenPowerlifting, weightlifting from OpenWeightlifting. The percentile pools cover all ages, so every lifter — adult or high school — is measured against the same competitive-lifter pool. Enter a weight and reps for every lift (1 rep for a true max): a set of more than 1 rep is converted to an estimated 1RM with the same six-formula median as the Strength Calculators tab. Lifts left blank stay off the certificate.
Certificate weightsThe same KG / LB switch as the World Records tab — kilograms are the official unit.
Percentile sources: powerlifting percentiles are computed from OpenPowerlifting (bulk snapshot 14 Nov 2026; raw, full-power, one row per lifter). Weightlifting percentiles are computed from the OpenWeightlifting database (one row per lifter per class, shown only where the class has n ≥ 200); that pool covers all ages and levels and spans three IWF weight-class eras, with historical classes as recorded, not remapped. Percentiles are interpolated between the 10th and 95th percentiles and never extrapolated past them.
Lifts
Weight plus reps for each lift — leave a lift blank to keep it off the certificate.
The certificate below is print-ready: use your browser's Print command (or Share → Print on a phone) and it comes out on its own, one clean page — choose “Save as PDF” in the print dialog to keep a copy.